EVEN THO IT MAY WORK THE TOOL OR APPLIANCE OR TOY READ THIS FIRST!!

CHECK YOUR ALL USED BATTERIES BEFORE USING THE CHARGER! USE A VOLT METER TO MAKE SURE THAT THE USED BATTERY HAS NO LESS THAN (.6) VOLTS LESS THAN THE STATED VOLTAGE OF THE BATTERY.

EXAMPLE: IF A USED BATTERY THAT SAYS IT IS FOR A 12 VOLT TOOL READS WITH METER 11.6 OR HIGHER IT IS (IN MOST CASES) A GOOD BATTERY GO AHEAD AND CHARGE THE BATTERY.

IF THE USED BATTERY READS WITH A METER 11.5 OR LESS IT IS A BAD BATTERY AND NEEDS TO BE REPLACED!
CHECK YOUR CHARGER WITH A VOLT METER TO MAKE SURE IT IS PUTTING OUT THE CORRECT VOLTAGE!
IF THE CHARGER IS PUTTING OUT A UP TO 2 1/2 VOLTS HIGHER THAN STATED VOLTAGE (RELATIVELY STEADILY) IT IS
(GENERALLY) A GOOD CHARGER AND OK TO USE TO CHARGE YOUR BATTERY.

EXAMPLE: CHARGER STATES 12 VOLTS. WHEN USING THE METER IT READS 14.6 IT IS A GOOD CHARGER.
IF THE NUMBERS ARE MOVING ALL OVER NOT NEAR STEADY AT ALL OR LOWER THAN 11.6 OR HIGHER THAN 14.6 CHARGER MUST BE REPLACED!

YOUR CHARGER IS YOUR MOST DELICATE TOOL! IT MUST NOT BE DROPPED, HIT OR GET A VOLTAGE DROP OR SPIKE!
NEW BATTERIES NEED TO BE CONDITIONED TO GET A GOOD READING BEFORE USING!

THERE ARE NO RETURNS FOR ELECTRICAL EQUIPMENT.

ALL RETURNS MUST RMA ASSIGNED NUMBERS ON THEM OR THEY ARE NOT ACCEPTED!